|
|
|
GK150 Finishing Mower
The GK Finishing Mower with a working width of 1.5m is suitable for mounting onto tractors of 16hp and above.
Features both quality and performance in lawn care and turf applications where a professional finish is important.
The mower features four standard gauge wheels which allow better mower travel and manoeuvrability on rolling terrain with a more uniform cut.
The blade spindles are easily lubricated and feature tapered roller bearings for extended service life.
The compact design of the mower allows easy manoeuvrability around objects for added operator convenience.
|
|
|
|
Roller Mower Series
The McConnel Roller Mower Series is ideal for the professional groundsmanm with working widths of 1.8m and 2.4m, suitable for mounting onto the 3 point linkage of compact tractors of 35hp and over.
The Roller Mower is ideal for cutting grass from 12mm to 90mm high by adjusting the front and rear rollers. The full length skids are automatically adjusted when the rollers are raised and lowered. Complete with front and rear rubber flaps to prevent any material being thrown from the cutting deck.
|
|
|
|
SE Series
The SE Series is a range of economical single spindle, three point linkage mounted rotary mowers with cutting widths of 1.2m to 2.1m available.
Ideal for cutting grass, weeds and pasture, up to 25mm (1") diameter. Suitable for tractors of 15hp and over, with PTO speeds of 540rpm.
The flexible three point hitch design allows the mower to follow the contours of the ground. Also helping to minimise the stress on the mower and tractor when operating on uneven ground conditions. |
|
|
|
CY Heavy Duty Series
The McConnel heavy-duty rotary mower series is available in cutting widths of 1.5m and 1.8m and are suitable for tractors of 30hp and above.
Built to perform, the CY Heavy-Duty cutter clears overgrown scrub and brush up to 75mm (3") diameter.
The gearbox and tail wheel are fitted with heavy duty tapered roller bearings to provided a smooth operation and extended service life.
Front and rear chain guards are fitted as standard to ensure material is not thrown from the cutting deck.
An option on the CY series for cutting thicker and heavier gorse is a chain cutter kit with three hardened chains for extra force. |
|
|
|
PT8 & PT9 Pasture Toppers
A completely new design for 2005 the PT8 and PT9 Series of pasture toppers from McConnel are aimed at the economy market for medium duty work.
With working widths of 2.5m (8’) to 2.75m (9’) these all shaft driven, two rotor machines are ideal for the maintenance of grassland areas. Featuring easy height adjustment via two side skids and a sleeker, lighter build the PT8 and PT9 join the next generation of machines from McConnel. |
|
|
|
Topper 9 Heavy Duty
The all shaft drive of the 'Topper 9' enables this one machine to tackle everything from the lightest pasture topping to the heaviest set-a-side mowing without the worry of belt slip or breakage.
The reliable mechanical transmission is protected by a slip clutch, to prevent excessive torque through the drive train.
Reliability is the reason behind the heavy duty laminated height control wheels. Two are fitted to give an accurate cutting height on undulating ground. these carry the 'Topper9' clear of wet ground, where competitive products are dragged along on skids which may damage the swath.
|
|
|
|
SR Flex Wing
The SR Series Flex Wing rotary mower is available in cutting widths of 4.6m and 6m, suitable for tractors of 80hp and above for safe, fast, efficient and effective cutting on all terrains.
The flexible wings will operate at 22 degrees down and 90 degrees up for optimum performance over any contours.
Independent wing lift gives optimum manoeuvrability with the automatic levelling linkage keeping the deck parallel to the ground for an even cut and easy height adjustment. The heavy-duty swivel quick hitch tow bar allows the mower to follow uneven ground contours without placing undue stress on the tongue or the tractor's drawbar. The folding wings provide a compact transport position.
|
|
|
|
Schulte Series
The McConnel 5026 rotary mower, has a massive 7.9m cutting width and is compatible with tractors of 120hp and above. Due to the overall size of the rotary mower and the high rpm of the blade sets (974rpm), the McConnel 5026 cutting rate is 50% greater
compared to a current 6.0m mower.
A specially designed 200hp divider gearbox handles power delivery. The gearbox will run cool under maximum load even in hot weather. The power divider is located at the front of the 1.83m centre deck, this in turn supplies power to the 3.05m outer wings. Under the mower’s 7.9m deck 5 pan blade carriers provide momentum for increase cutting efficiency and greater fuel saving. Each pan blade carrier holds 4 heavy-duty blades that overlap by 154mm to eliminate any unsightly un-mown strips.
Designed for fast and efficient mowing of set-a-side, grass pasture, shedding stalks, bush cutting and large open spaces such as airfields. |