|
|
|
Accord DF-1/Accord DF-2
Rear-mounted implements can often exceed the maximum permissible axle loads; this can have an adverse effect on the tractor steering.
Front-Mounted Hoppers Are Accord's Ideal Solution To This Problem:
· No reduction of minimum permissible front axle load
· Front-mounted hopper waives need for additional ballast
· Increased safety on sloping ground
The front mounted DF-1 can be filled easily from "Big Bags", auger or tipping trailer, the filling height is 107.5 cm. Hopper capacity is 750 l with an optional extension to 1150 l. Front Wheel Packers are also available.
A hydraulic fan drive is available as an option for tractors not fitted with a front p.t.o. shaft. Power requirement is from 80 kW.
Accord DF-2 -
Modular Seed Drill With Front Hopper (5.0m & 6.0m)
The modular design of the component units makes them extremely versatile. They can be combined with many different types of cultivators from 4.5 to 6 m working widths.
|
|
|
|
Accord DL -
compact, light duty tractor mounted seed drill (3.0m - 4.5m)
The DL is the ideal machine for the small and medium sized farms. Power requirements are from as little as 55 kW due to the DL’s close centre of gravity.
The DL is equipped with a 750 litre hopper as standard which can be extended to 1000 litres. The well proven PNEUMATIC seeding System can be used for various types of seeds at application rates from 2 - 380 kg/ha.
The standard DL is equipped with a 540 rpm flat multi V-belt with optional 1000 rpm available as an option. Machines over 3.0m have toolbars which can be easily folded by hand for road transport.
|
|
|
|
DT: Rigid End-Tow Seed Drill: 6.0 m - 9.0 m
The DT is equipped with a double hopper and two metering devices. Hopper capacities range from 1500 litres (6 m version) to 2000 litres on the (8 m & 9 m versions). The metering units can be controlled remotely with the optional electric half width shut off.
The 8 m and 9 m machines are fitted with large bore seed delivery hose to ensure exact seed distribution.
The Metering & Distribution System: For Seeding Accuracy
The central metering device accurately measures any desired volume of seed from 2 kg per hectare to 380 kg per hectare.
The central, totally enclosed cell wheel of the metering device accurately measures the required volume of seed and discharges it into the venturi cone where it is mixed with the air stream and then conveyed through the diffusor tube and the seed delivery hoses to the coulters. The residual quantities remaining in the hopper when sowing fine seed are negligible, for e.g. 500 g when sowing rape, the residue can be removed via the emptying flap.
For the sowing of fine seeds, e.g. rape of grass, the metering device can be infinitely adjusted to fine seed/micrometering by means of a spindle, without any need for tools.
|
|
|
|
DV: High Performance Seed Drill in Solo or Combination with Trailed Seedbed Cultivators
The simple coupling process of the ACCORD DV to the rear of a seedbed cultivator allows the users complete flexibility. Versatile and variable!
The high performance DV has a hopper capacity of 1650 l with an extension to 2000 l available as an option. The flotation tyres directly support the hopper weight so that the depth control of the front press is not adversely affected.
Suitable For Smaller Tractors
The compact construction optimises the machines' centre of gravity. This in turn enables the ACCORD DV to be used with tractors from 75 KW upwards.
The toolbar is located under the hopper. Pivot points in the toolbar allow the wing sections to be folded up compactly accross the rear of the machine. The "Gullwing" markers can be set for either track or centre marking and fold with the machine width for road transport.
|
|
|
|
DG: Ideal for Large Scale Farms and Estates
The DG is the trailed version in ACCORD series of modular seed drills. With its large seed hopper, two metering devices and 6 - 8 m working width, the DG achieves an impressively high performance.
The large hopper capacity of 3500 l can be easily filled using "Big Bags" or with a filling auger.
Minimum Soil Compaction
The machine weight is distributed across four flotation tyres. This ensures reducted ground compaction. An inspection platform and ladder along with hydraulic lifting of the toolbar and metering wheel are all standard features of the DG.
In the hydraulic folding toolbar enables conversion for road transport and also achieves a transport width of 3.0 m. Dual circuit air brakes are fitted as standard with hydraulic brakes available as an option.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|